Let's do this.
-
@aris @maruno @TechConnectify I actually source them straight from China, because they are the king of LiFePo4; in 2012 ish western manufacturers choose to go with nickel-cobalt chemistries, which are far more expensive, because at the time they had a much bigger capacity per weight. These days they're very similar.
To add, China tried to flood the western markets with cheap EVs but got held back by regulations/taxes so they have a huge oversupply of these batteries and sell them for dirt cheap
@aris @maruno @TechConnectify You do have to look around for reputable sellers, because of course the cheapest ones are also cheaply built, but there are very good ones that are also used in cars and such. I'm a bit busy / between things right now but if you look around a little you should be able to find very good *and* affordable ones
-
@aris @maruno @TechConnectify You do have to look around for reputable sellers, because of course the cheapest ones are also cheaply built, but there are very good ones that are also used in cars and such. I'm a bit busy / between things right now but if you look around a little you should be able to find very good *and* affordable ones
@anthropy @maruno @TechConnectify Since I would be buying separate batteries and BMS in that case, that requires research and knowing perfectly what I do. But the price difference seems worth it, I'll delay this until I have to to work on it.
Thanks for sharing your experience. -
@anthropy @maruno @TechConnectify Since I would be buying separate batteries and BMS in that case, that requires research and knowing perfectly what I do. But the price difference seems worth it, I'll delay this until I have to to work on it.
Thanks for sharing your experience.@aris @maruno @TechConnectify As long as you have a BMS that is appropriate for the load (overspecced but configurable is okay but make sure to configure it to turn off at the maximum load), it should be fine. It's also worth noting that if you have a low voltage pack (e.g 24V in my case) you have to get really thick cables to carry the amps (48V might be better in that sense).
I'll try see if I can find some good cell manufacturer examples later. For the BMS I personally use Daly.
-
Let's do this.
@TechConnectify
Watch until the end! -
@aris @maruno @TechConnectify As long as you have a BMS that is appropriate for the load (overspecced but configurable is okay but make sure to configure it to turn off at the maximum load), it should be fine. It's also worth noting that if you have a low voltage pack (e.g 24V in my case) you have to get really thick cables to carry the amps (48V might be better in that sense).
I'll try see if I can find some good cell manufacturer examples later. For the BMS I personally use Daly.
@anthropy @maruno @TechConnectify Do you wire them between the panels and main inverter or on the AC side? I was careless when designing my setup 4 years ago and didn't think I would need batteries anytime soon, so the SMA isn't really designed for battery storage, I would have to build around it.
-
@aris @maruno @TechConnectify As long as you have a BMS that is appropriate for the load (overspecced but configurable is okay but make sure to configure it to turn off at the maximum load), it should be fine. It's also worth noting that if you have a low voltage pack (e.g 24V in my case) you have to get really thick cables to carry the amps (48V might be better in that sense).
I'll try see if I can find some good cell manufacturer examples later. For the BMS I personally use Daly.
@anthropy @aris Do take into account your time and what you are getting into, that it's still not finished is an indicator how much worth it can be.
But also I quite frankly find it a bit dangerous what you are preaching to just get any random stuff from China without approvals.
(I guess it wasn't apparent) Consider what risk you are taking and comfortable with. -
@gudenau @TechConnectify TL:DW?
(I do plan to watch it, but would love to hear what parts stood out most to you.
)@TechConnectify @GoodNewsGreyShoes Make sure to watch the entire thing.
-
@anthropy @aris Do take into account your time and what you are getting into, that it's still not finished is an indicator how much worth it can be.
But also I quite frankly find it a bit dangerous what you are preaching to just get any random stuff from China without approvals.
(I guess it wasn't apparent) Consider what risk you are taking and comfortable with.@maruno @aris The LiFePo4 cells they're selling here for 300 are sourced from china for <100, they're the same cells, you just gotta know which ones to get.
My system is working, batteries and all, and sure I could and want to upgrade it further, but that doesn't mean it can't be something relatively easy to deploy.
-
TL;DW
how does the solar panel and battery deterioration affect the calculations? The panels might las 25 years but definitely they don't stay as efficient.
@mattesilver @TechConnectify usually the warranty is that after 25 years the panels will still produce at least 80%, these days often even more, and that's the *minimum*, if one is lucky¹ it could easily be more.
¹ or lives in an area with cooler summers, and/or has bought more expensive panels with a better warranty
-
@maruno @aris The LiFePo4 cells they're selling here for 300 are sourced from china for <100, they're the same cells, you just gotta know which ones to get.
My system is working, batteries and all, and sure I could and want to upgrade it further, but that doesn't mean it can't be something relatively easy to deploy.
@anthropy @aris You know very well I am not talking about base materials such as the LiFePo4 here, which the average consumer shouldn't even know. But what it is put in, it's certification and the certification, safety and requirements of the full installation and what you are connecting it to.
You do you, but mains and high voltage DC electricity is not a toy.

-
@anthropy @aris You know very well I am not talking about base materials such as the LiFePo4 here, which the average consumer shouldn't even know. But what it is put in, it's certification and the certification, safety and requirements of the full installation and what you are connecting it to.
You do you, but mains and high voltage DC electricity is not a toy.

-
@mattesilver @TechConnectify usually the warranty is that after 25 years the panels will still produce at least 80%, these days often even more, and that's the *minimum*, if one is lucky¹ it could easily be more.
¹ or lives in an area with cooler summers, and/or has bought more expensive panels with a better warranty
thank you, I got it from the other answers.
Somehow no one mentions longevity of batteries...
Another thing is that it's all stupid-"smart". I have a PV installation, and it all requires connection to some 3rd party SaaS. Once the company goes belly-up, as they often do, it's all an expensive paperweight.
-
@anthropy @maruno I think the warning and words of caution are fair. These batteries can cause fire and if after inspection (if me and my family is still alive) the experts say my no-name hacked battery setups caused it, I may find myself homeless. That's why despite the margins I may end up buying from an European seller. I need to put more thoughts into it.
-
thank you, I got it from the other answers.
Somehow no one mentions longevity of batteries...
Another thing is that it's all stupid-"smart". I have a PV installation, and it all requires connection to some 3rd party SaaS. Once the company goes belly-up, as they often do, it's all an expensive paperweight.
@mattesilver @TechConnectify batteries were mentioned in the video, in the context of how car batteries have been exceeding the longevity expectations by a lot
as for the smart, our installation is smarter than I'd like, requires a connection and sends data to a 3rd party, but when (not if) internet is not available it's still producing energy, storing it in the batteries and using it locally; I'm not sure about reselling it to the grid, but I think that would also be working. The part that will disappear if the company dies is just the data logging and reporting, and losing that would be bad, but not as bad as losing everything else.
-
@anthropy @maruno I think the warning and words of caution are fair. These batteries can cause fire and if after inspection (if me and my family is still alive) the experts say my no-name hacked battery setups caused it, I may find myself homeless. That's why despite the margins I may end up buying from an European seller. I need to put more thoughts into it.
@aris @maruno and that's entirely fair- I'm not saying not to be cautious, but I find it a little much to say that neither of us know anything about this and that I'm "preaching" for unsafe setups, when I've explicitly said I'd have to look into what good cells are later.
Any setup can cause a fire, and I've seen some extremely scary thin wiring and connections in premade bat boxes that are "okay because we probably don't pull that much amps" (youtube is full of these). The key is research tbh.
-
@Janne_O @almino Depending on country, YT inserts its own advertisements into videos even when the creator is not (or cannot) monetize the video.
They've been doing this for about 18 months, IIRC.
EDIT: https://www.pootlepress.com/2025/04/can-youtube-show-ads-on-your-channel-if-you-turn-off-monetization/ says they've been doing it since 2020, but not if Alec is part of the YouTube Partner Program (idk if he is). Google's support pages confirm the current state: https://support.google.com/youtube/answer/2475463?hl=en
(I've had YT Premium since it was "YT Red" and given away free with what was "Google Music" so I often don't notice when YT changes how much they advertise.)
@BoydStephenSmithJr @almino I have watched the video couple of times now and have seen no ads. And even if I did, I don’t see the point in throwing a fit about it. There are more important things to get upset about than couple of ads in an informative video.
-
@TechConnectify Democrats just voted to continue funding DHS. Democrats have demonatrated they don't care about Palestinians and nor do they care about you.
and yes, the lithium only has to be mined once, but where is the mine? not your back yard! it will come from further colonial expansion.
@burnitdown You are correct, but that is not the issue. The issue is under whose party's control you would be best able to support Palestinians, protest against DHS, and in general make your voice heard and organise resistance. And even though it's possible to organise resistance in a fascist dictatorship, it's much easier under a dysfunctional and comparatively mildly hostile government.
-
@aris @maruno and that's entirely fair- I'm not saying not to be cautious, but I find it a little much to say that neither of us know anything about this and that I'm "preaching" for unsafe setups, when I've explicitly said I'd have to look into what good cells are later.
Any setup can cause a fire, and I've seen some extremely scary thin wiring and connections in premade bat boxes that are "okay because we probably don't pull that much amps" (youtube is full of these). The key is research tbh.
@aris @maruno Okay I've finished my long working day and I looked around a little.
I decided to be lazy and let Gemini Deep Research gather some intel on the subject, it seems to align with what I remember from my own research: https://gemini.google.com/share/3be8913c4777
One thing that I can immediately agree with from there is that https://nkon.nl is a very good european-based supplier, with cells in the exact price range I mentioned: https://www.nkon.nl/rechargeable/lifepo4/prismatisch.html
so if you DO want to try it, that's the way.
-
@aris @maruno Okay I've finished my long working day and I looked around a little.
I decided to be lazy and let Gemini Deep Research gather some intel on the subject, it seems to align with what I remember from my own research: https://gemini.google.com/share/3be8913c4777
One thing that I can immediately agree with from there is that https://nkon.nl is a very good european-based supplier, with cells in the exact price range I mentioned: https://www.nkon.nl/rechargeable/lifepo4/prismatisch.html
so if you DO want to try it, that's the way.
@maruno Also sorry if I came across rough earlier. I was busy and didn't have the mental capacity to get into some debate about the safety of things, and also didn't like the seeming implication that I didn't know what I was doing (I've been doing this for many years and definitely did my research and talked with experts in the field).
If you do want to have an openminded discussion about it I'm all open to it. But.. please don't just berate me with assumptions, it honestly feels condescending.
-
@aris @maruno Okay I've finished my long working day and I looked around a little.
I decided to be lazy and let Gemini Deep Research gather some intel on the subject, it seems to align with what I remember from my own research: https://gemini.google.com/share/3be8913c4777
One thing that I can immediately agree with from there is that https://nkon.nl is a very good european-based supplier, with cells in the exact price range I mentioned: https://www.nkon.nl/rechargeable/lifepo4/prismatisch.html
so if you DO want to try it, that's the way.